Germany
Handrad für G 5/8" Druckluftanschluß 300 bar, lange Ausführung
Connection shaft with pressure screw for filling fittings G5/8" 300bar male thread - G1/4" male thread. Filling connection for storage batteries, breathing air compressors or filling ramps as a spare part or for completion. Suitable for permanent connections with wrench size 32mm for tightening with fork wrench / open-end wrench.
Adapter for oxygen to normal air, extanded threads
filling and removing adapter for oxygen / air; to fill nitrox tanks with oxygen valve.
Thread adapter compressed air G 5/8 "internal thread - nitrogen W24.8 x 1/14" internal thread. This adapter is designed to connect pressure reducers to compressed air nitrogen bottles. Or to fill nitrogen bottles on high pressure compressors with 200bar compressed air
Adapter Air (5/8") -- inert gas (W21.8) inside / inside
Filling adapter for nitrogen according to DIN477-10 for filling nitrogen cylinders with valves that have a flow-off protection / residual pressure valve. Residual pressure valves work similar to check valves and must be actuated to refill the gas cylinder.
Filling adapter for carbonic acid for filling CO2 and argon cylinders with valves according to DIN 477-6 which have a flow-off protection/residual pressure valve. The thread W21.8 is used for all gas cylinder valves that are used for shielding gas welding, argon, helium, carbonic acid and argon mixed gases.
Anschlußkreuzstück für Manometer + Entlüftungsventil + Anschlußwelle
Mono Valve Right Compressed Air 230 bar Expandable EN144 / DIN EN ISO 12209, Right Tank Valve. Expandable for Secondary Outlet with G5/8" Thread, e.g., High Tech Diving, Polaris, Seemann, or Subgear.
Multiadapter 300 Bar Sauerstoff/Helium/Druckluft auf Druckluft 300 Bar Innengewinde
Mono Valve Left Compressed Air 230 bar Expandable EN144 / DIN EN ISO 12209, Left Tank Valve. Expandable for Secondary Outlet with G5/8" Thread, e.g., High Tech Diving, Polaris, Seemann, or Subgear.
Air Stop suitable for regulator cyclone. A small component which is installed between the second stage and the regulator hose. By moving the adjusting ring, the air supply to the second stage can be interrupted or released with a single movement.
Valve expanding "from one make two"
Stahlflasche 50L für Pressluft 350 / 525bar. Industrei Pressluftflasche Druckluftflasche zum Transport von verdichteter Luft. Certifiziert nach ADA mit 10 Jahren TÜV intervall.
Brass stopper for compressed air G5 / 8 "with O-ring pressure-resistant 200bar, hexagon with key width 30mm
Connection T-piece for interconnecting storage cylinders G5/8" - 2x G1/4"
Air Dry zur Atemlufttrocknung 1 Liter Eimer
Nitrox - Clean Personalfilter
Monovalve compressed air left, 230 bar, expandable EN144