Germany
Brass stopper for compressed air G5 / 8 "with O-ring pressure-resistant 200bar, hexagon with key width 30mm
Handrad für G 5/8" Druckluftanschluß 300 bar, lange Ausführung
Bourdon tube pressure gauge oxygen class 1.6, diameter 63mm, indicating range 0...400 bar. Pressure gauge G1/4" connection at the bottom, housing made of sheet steel, insertion disc made of polycarbonate, blow-out back plate, measuring system CU alloys, front disc crystal clear plastic.
Union nut W30x2 suitable for all 300bar industrial valves with left-hand thread welding gases, test gases and fuel gases.
Air Dry zur Atemlufttrocknung 1 Liter Eimer
Adapter for oxygen to normal air, extanded threads
filling and removing adapter for oxygen / air; to fill nitrox tanks with oxygen valve.
Adapter Air (5/8") -- inert gas (W21.8) inside / inside
Thread adapter compressed air G 5/8 "internal thread - nitrogen W24.8 x 1/14" internal thread. This adapter is designed to connect pressure reducers to compressed air nitrogen bottles. Or to fill nitrogen bottles on high pressure compressors with 200bar compressed air
Filling adapter for carbonic acid for filling CO2 and argon cylinders with valves according to DIN 477-6 which have a flow-off protection/residual pressure valve. The thread W21.8 is used for all gas cylinder valves that are used for shielding gas welding, argon, helium, carbonic acid and argon mixed gases.
Filling adapter for nitrogen according to DIN477-10 for filling nitrogen cylinders with valves that have a flow-off protection / residual pressure valve. Residual pressure valves work similar to check valves and must be actuated to refill the gas cylinder.
Monoventil Druckluft 230 Bar Standart-Ventil Flaschenhalsgewinde kleinkonisch ( 17E )
Connection shaft with pressure screw for filling fittings G5/8" 300bar male thread - G1/4" male thread. Filling connection for storage batteries, breathing air compressors or filling ramps as a spare part or for completion. Suitable for permanent connections with wrench size 32mm for tightening with fork wrench / open-end wrench.
Connection T-piece for interconnecting storage cylinders G5/8" - 2x G1/4"
Air Stop suitable for regulator cyclone. A small component which is installed between the second stage and the regulator hose. By moving the adjusting ring, the air supply to the second stage can be interrupted or released with a single movement.
Multiadapter 300 Bar Sauerstoff/Helium/Druckluft auf Druckluft 300 Bar Innengewinde
Anschlußkreuzstück für Manometer + Entlüftungsventil + Anschlußwelle
Mono diving cylinder valve left not expandable G5/8" 200/230 bar for diving cylinders with M25x2mm cylinder neck thread according to DIN EN 144
Mono diving cylinder valve right not expandable G5/8" 200/230 bar for diving cylinders with M25x2mm cylinder neck thread according to DIN EN 144
Tauchflaschenventil horizontal 300bar Druckluftanschluss, M18x1,5