Germany
Shut-off valve for 300 bar with G1/4" female thread on both sides
Air Stop suitable for regulator cyclone. A small component which is installed between the second stage and the regulator hose. By moving the adjusting ring, the air supply to the second stage can be interrupted or released with a single movement.
Connection T-piece for interconnecting storage cylinders G5/8" - 2x G1/4"
Connection shaft with pressure screw for filling fittings G5/8" 300bar male thread - G1/4" male thread. Filling connection for storage batteries, breathing air compressors or filling ramps as a spare part or for completion. Suitable for permanent connections with wrench size 32mm for tightening with fork wrench / open-end wrench.
connection for filling hose 5/8" 300bar extended thread - 1/4" estended thread
Brass stopper for compressed air G5 / 8 "with O-ring pressure-resistant 200bar, hexagon with key width 30mm
Blanking plug G5/8" Pressure-resistant 200bar with 60° sealing cone to seal Material galvanized steel Hexagon with wrench width 30mm
Monoventil Druckluft erweiterbar 230 Bar, linkes Brückenventil für Flaschenhalsgewinde M18x1,5
Monoventil Druckluft erweiterbar 230 Bar, rechtes Brückenventil für Flaschenhalsgewinde M18x1,5
Doppel - Standfuss 171 mm Flaschendurchmesser. Tauchflaschen sind Druckbehälter und müssen deshalb mit einen Standfuß versehen werden. Der im Tauchsport übliche Flaschenstandfuß ist aus schwarzen schlagzähen Gummiähnlichen Kunstoff. In dieser Ausführung für Daoppeltauchgeräte mit 185mm Flaschenmitte - Flaschenmitte.
Wer kennt das nicht, zu Hause taucht man mit zwei getrennten ersten Stufen und für den Urlaub baut man alles um, weil ja die Flasche da nur einen Abgang hat. Die Lösung ein Vorsatzventil, wie im Bild. Und das Gute, jeder Automat ist einzeln auch unter Wasser absperrbar.
Handrad für G 5/8" Druckluftanschluß 300 bar, lange Ausführung
Anschlußkreuzstück für Manometer + Entlüftungsventil + Anschlußwelle
Anschlußkreuzstück für Manometer + Entlüftungsventil + Anschlußwelle
Mono Valve Right Compressed Air 230 bar Expandable EN144 / DIN EN ISO 12209, Right Tank Valve. Expandable for Secondary Outlet with G5/8" Thread, e.g., High Tech Diving, Polaris, Seemann, or Subgear.
Gewindeadapter 300 Bar Druckluft Aussengewinde - 200 bar Druckluft Innengewinde mit Sicherheitsventil 232bar und Entlüftung. Adapter zum füllen von 200bar Tauchflaschen oder Kartuschen für den Schiesssport an Tauchflaschen oder Druckluftflaschen mit 300bar Fülldruck.
Filling adapter for carbonic acid for filling CO2 and argon cylinders with valves according to DIN 477-6 which have a flow-off protection/residual pressure valve. The thread W21.8 is used for all gas cylinder valves that are used for shielding gas welding, argon, helium, carbonic acid and argon mixed gases.
Filling adapter for nitrogen according to DIN477-10 for filling nitrogen cylinders with valves that have a flow-off protection / residual pressure valve. Residual pressure valves work similar to check valves and must be actuated to refill the gas cylinder.
Monoventil Druckluft 230 Bar Standart-Ventil Flaschenhalsgewinde kleinkonisch ( 17E )