Germany
Filling adapter for carbonic acid for filling CO2 and argon cylinders with valves according to DIN 477-6 which have a flow-off protection/residual pressure valve. The thread W21.8 is used for all gas cylinder valves that are used for shielding gas welding, argon, helium, carbonic acid and argon mixed gases.
Brass stopper for compressed air G5 / 8 "with O-ring pressure-resistant 200bar, hexagon with key width 30mm
filling and removing adapter for oxygen / air; to fill nitrox tanks with oxygen valve.
Tauchflaschenventil horizontal 230bar Druckluftanschluss, kleinkonisch
Thread adapter compressed air G 5/8 "internal thread - nitrogen W24.8 x 1/14" internal thread. This adapter is designed to connect pressure reducers to compressed air nitrogen bottles. Or to fill nitrogen bottles on high pressure compressors with 200bar compressed air
Multiadapter 300 Bar Sauerstoff/Helium/Druckluft auf Druckluft 300 Bar Innengewinde
Adapter for oxygen to normal air, extanded threads
Valve expanding "from one make two"
Adapter Air (5/8") -- inert gas (W21.8) inside / inside
Bourdon tube pressure gauge oxygen class 1.6, diameter 63mm, indicating range 0...400 bar. Pressure gauge G1/4" connection at the bottom, housing made of sheet steel, insertion disc made of polycarbonate, blow-out back plate, measuring system CU alloys, front disc crystal clear plastic.
Air Dry zur Atemlufttrocknung 1 Liter Eimer
Monoventil Druckluft 230 Bar Standart-Ventil Flaschenhalsgewinde kleinkonisch ( 17E )
Filling adapter for nitrogen according to DIN477-10 for filling nitrogen cylinders with valves that have a flow-off protection / residual pressure valve. Residual pressure valves work similar to check valves and must be actuated to refill the gas cylinder.
Connection T-piece for interconnecting storage cylinders G5/8" - 2x G1/4"
Monovalve Compressed Air 230 Bar Standard diving tank valve with bottle neck thread M18x1.5mm. Smaller gas cylinders and diving tanks have the smaller bottle neck thread. In the past, these pressure vessels were equipped with the small conical thread, while newer ones often have the M18x1.5mm bottle neck thread. Sealing is achieved with an O-ring.
Connection shaft with pressure screw for filling fittings G5/8" 300bar male thread - G1/4" male thread. Filling connection for storage batteries, breathing air compressors or filling ramps as a spare part or for completion. Suitable for permanent connections with wrench size 32mm for tightening with fork wrench / open-end wrench.
Air Stop suitable for regulator cyclone. A small component which is installed between the second stage and the regulator hose. By moving the adjusting ring, the air supply to the second stage can be interrupted or released with a single movement.
Tauchflaschenventil horizontal 300bar Druckluftanschluss, M18x1,5
Anschlußkreuzstück für Manometer + Entlüftungsventil + Anschlußwelle
SH-Monovalve G5/8" compressed air 230 bar bottle neck thread M18x1.5mm. The "Standard Horizontal Valve" is arranged horizontally, with the valve handle and regulator connection opposite each other and at a 90° angle to the axis of the diving tank.
