Items 1 - 20 of 158
Bracket adapter, adapter for connecting DIN regulator to INT diving bottle valves. This adapter is mainly needed during diving vacations. Many dive centers in the American dominated countries use the INT tank valve as a tank valve, to which the regulator is attached by means of a bracket adapter.
Diving bottle / steel bottle 1,5 litre with standard valve for compressed air 200bar the diving bottle has a diameter of 83mm, the steel bottle can be used for all gases, the type of gas depends on the valve. Diving cylinders with a volume of 1.5 litres are often used as argon cylinders for filling the dry suit with argon gas.
Diving bottle / steel bottle 1,5 litre with standard valve for compressed air 200bar the diving bottle has a diameter of 83mm, the steel bottle can be used for all gases, the type of gas depends on the valve. Diving cylinders with a volume of 1.5 litres are often used as argon cylinders for filling the dry suit with argon gas.
Doppelgewindenippel G 1/8" - G 1/4" Innenkegel 60° schwere Ausführung
Doppelgewindenippel G1/4\" Aussengewinde Flachdichtend mit Dichtring - JIC 7/16\" UNF Aussengewinde schwere Ausführung. Die Jic Verschraubungen werden in der Hydraulik oft benutzt. Auch der Kompressorenhersteller Coltri benutzt diesen Anschluss für seine Füllschläuche. Inserer Füllventile können mit diesem Gewindeadapter an die Coltri Füllschläuche angebracht werden.
Vormontiertes Einstellbares T-Stück mit Anschlussgewinde 7/16"-20 UNF Das T-Stück hat zweimal ein JIC Aussengewinde und eine
MAV pressure gauge connection fitting with R1/4" female thread on Ermete compression fitting L10. Suitable for 10 mm pipe, light version, for pressure gauges with R1/4" connection thread - The connection fitting with sealing edge ring can be used for a max. operating pressure of 315 bar.
Kupplungsstecker mit Schlauchtülle für Schlauchschnellkupplungen Nennweite 7,2. Passend für Druckluftschläuche mit 6mm Innendurchmesser. Material Messing in Industriequalität.
Manometer Profildichtring aus weich Kupfer für Manometeranschlüsse G 1/4". Das weiche Kupfer wird beim Fetziehen des Manometers verformt und erzeugt so eine metallische Dichtung. Der Kupferdichtring ist einsetzbar bei Manometern mit Führungsdorn am Manometeranschluss.
Manometer für Druckluft Kl.1.6, 63mm Durchmesser, Anzeige 0...400 bar. Manometer mit R1/4\" Anschluss unten Gehäuse: Stahlblech, Messsystem, Anschluss und Zeigerwerk: Messing, Sichtscheibe: glasklarer Kunststoff
Schlauchtülle, mit Mutter G 1/8" mit Schlüsselweite 12mm für Schläuche mit 4mm innendurchmesser Maximaler Druck 16 bar Material Messing
Manometer Profildichtring aus weich Kupfer für Manometeranschlüsse G 1/4". Das weiche Kupfer wird beim Fetziehen des Manometers verformt und erzeugt so eine metallische Dichtung. Der Kupferdichtring ist einsetzbar bei Manometern mit Führungsdorn am Manometeranschluss.
Tauchflaschenventile als Brücke 232bar, Abstand 185mm für Druckluft Tauchflaschen 171mm Durchmesser mit großkonischem Flaschenhalsgewinde
Boat diving apparatus as complete system 232bar 3 litre diving cylinder, carrying frame and regulator, the small diving apparatus for all work under and around the boat.
Festes Winkelstück für Hochdruck UNF 7/16" aussen, UNF 7/16" innen
Buddyleine mit 2m Gurt, zum Befestigen am Harness
Double diving cylinders 2x6 liters 300 bar compressed air lockable bridge 185mm distance between cylinders. The double diver for women and youth.
Pipe bridge middle section 232 and 300 bar, for connecting diving cylinder valves with connection thread M16x1 right and left-hand thread, e.g. Polaris and Scubapro bridge valves. This pipe bridge is particularly suitable for connecting 4 and 7 liter scuba tanks.
Steel cylinder / Diving cylinder 2 litres 232bar gas type stamping Breathing Apparatus 100mm diameter with valve. These small diving cylinders are mainly used in rebreathers, oxygen rescue cases or as argon cylinders to fill the dry suit with argon.
Doppelventil Druckluft 300 bar für Tauchflaschen mit M25x2 Flaschenhalsgewinde
Items 1 - 20 of 158