Germany

Filling adapter for nitrogen according to DIN477-10 for filling nitrogen cylinders with valves that have a flow-off protection / residual pressure valve. Residual pressure valves work similar to check valves and must be actuated to refill the gas cylinder.

Thread adapter compressed air G 5/8 "internal thread - nitrogen W24.8 x 1/14" internal thread. This adapter is designed to connect pressure reducers to compressed air nitrogen bottles. Or to fill nitrogen bottles on high pressure compressors with 200bar compressed air

Monovalve Compressed Air 230 Bar Standard diving tank valve with bottle neck thread M18x1.5mm. Smaller gas cylinders and diving tanks have the smaller bottle neck thread. In the past, these pressure vessels were equipped with the small conical thread, while newer ones often have the M18x1.5mm bottle neck thread. Sealing is achieved with an O-ring.

Monovalve for mixed gases/Nitrox with outlet connection M26x2, pressure range 230 bar with bottle neck thread M18x1.5mm. The valve with its handle is a standard shut-off device for diving tanks and breathing apparatus.

SH-Monovalve G5/8" compressed air 230 bar bottle neck thread M18x1.5mm. The "Standard Horizontal Valve" is arranged horizontally, with the valve handle and regulator connection opposite each other and at a 90° angle to the axis of the diving tank.

Tauchflaschenventil horizontal 300bar Druckluftanschluss, M18x1,5

SH-monodiving tank valve Nitrox / mixed gases 230 bar M26x2 connection thread M18x1.5 bottle neck thread. Diving tank valve for installation in diving tanks with bottle neck thread M18x1.5mm.