Germany
Items 1 - 50 of 66
In stock
Adapter R3/8" Aussengewinde - R1/8" Innengewinde ( Reduzierung )
Out of stock
Thread adapter R3/8" male thread - R1/4" female thread ( reducer ) Reducing spigot with sealing edge B, metal sealing
In stock
Connecting shaft with hand wheel for filling hose G5/8" 200bar external thread on M16x1mm external thread. Connection shaft to complete pneumatic filling fittings and filling hoses.
In stock
Connection shaft with handwheel for filling hose G5/8" 300bar AG- M16x
In stock
Boat diving apparatus as complete system 232bar 3 litre diving cylinder, carrying frame and regulator, the small diving apparatus for all work under and around the boat.
In stock
Boat diving apparatus as complete system 200bar 4 litre diving cylinder, carrying frame and regulator, the small diving apparatus for all work under and around the boat.
In stock
Boat diving equipment as a complete system 200bar 5 litre diving bottle, carrying frame and breathing regulator. A small diving unit for carrying out small jobs under and around the boat.
In stock
Boat diving apparatus as complete system 300bar 5 litre diving bottle, carrying frame and regulator. The diving apparatus for short dives for all work below and on the boat below the waterline.
In stock
Boat diving apparatus as complete system 232bar 6 litre diving bottle, carrying frame and regulator. The diving apparatus for short dives for all work below and on the boat below the waterline.
In stock
Boat diving apparatus as complete system 300bar 6 litre diving bottle, carrying frame and regulator. The diving apparatus for short dives for all work below and on the boat below the waterline.
In stock
Bracket adapter, adapter for connecting DIN regulator to INT diving bottle valves. This adapter is mainly needed during diving vacations. Many dive centers in the American dominated countries use the INT tank valve as a tank valve, to which the regulator is attached by means of a bracket adapter.
In stock
Manometer Profildichtring aus weich Kupfer für Manometeranschlüsse G 1/4". Das weiche Kupfer wird beim Fetziehen des Manometers verformt und erzeugt so eine metallische Dichtung. Der Kupferdichtring ist einsetzbar bei Manometern mit Führungsdorn am Manometeranschluss.
In stock
Manometer Profildichtring aus weich Kupfer für Manometeranschlüsse G 1/4". Das weiche Kupfer wird beim Fetziehen des Manometers verformt und erzeugt so eine metallische Dichtung. Der Kupferdichtring ist einsetzbar bei Manometern mit Führungsdorn am Manometeranschluss.
In stock
Doppelgewindenippel G1/4\" Aussengewinde Flachdichtend mit Dichtring - JIC 7/16\" UNF Aussengewinde schwere Ausführung. Die Jic Verschraubungen werden in der Hydraulik oft benutzt. Auch der Kompressorenhersteller Coltri benutzt diesen Anschluss für seine Füllschläuche. Inserer Füllventile können mit diesem Gewindeadapter an die Coltri Füllschläuche angebracht werden.
In stock
Doppelgewindenippel G 1/8" - G 1/4" Innenkegel 60° schwere Ausführung
Out of stock
Doppelventil Druckluft 300 bar für Tauchflaschen mit M25x2 Flaschenhalsgewinde
Doppelventil rechts für Druckluft 300 bar zu montieren auf Tauchflaschen mit kleinkonischem Flaschenhalsgewinde
Doppelventil Druckluft 300 bar für Tauchflaschen mit M25x2 Flaschenhalsgewinde
In stock
MAV pressure gauge connection fitting with R1/4" female thread on Ermete compression fitting L10. Suitable for 10 mm pipe, light version, for pressure gauges with R1/4" connection thread - The connection fitting with sealing edge ring can be used for a max. operating pressure of 315 bar.
In stock
Festes Winkelstück für Hochdruck UNF 7/16" aussen, UNF 7/16" innen
In stock
Flaschenaufkleber, zur Kennzeichnung von Nitrox Tauchflaschen.
In stock
Thread adapter / high pressure connection 300 bar multi - G1/4\" Male thread. Filling and end connection for valves of industrial gas cylinders with W30x2mm external thread. This connection can be used for assembling filling hoses or for interconnecting cylinder batteries.
Out of stock
Gewindeadapter 300 Bar Druckluft G 5/8" AG - Edelgas W21.8 AG
In stock
Gewindeadapter 300 Bar Druckluft G 5/8" AG - Edelgas W21.8 AG
In stock
Adapter 300 Bar normal air to 300 Bar nitrox (M26x2)
Out of stock
Gewindeadapter 300bar Druckluft G5/8" - Ermeto S8-Schneidringverschraubung
In stock
Gewindeadapter 300bar Druckluft G5/8" außen. - Ermeto S6-Schneidringverschraubung zum anschlus von Rohrleitung 6mm an G5/8" 300bar Tauchflaschen/Speicherflaschen
In stock
Adapter for normal air 5/8" 300 bar extended - 1/4" intended
In stock
Gewindeadapter Druckluft G 5/8\" Aussengewinde - Stickstoff W24.8 Aussengewinde. Dieser Adapter kann dazu benutz werden um Stickstoff Druckminderer an Pressluftflaschen anzuschliesen.
In stock
Adapter 3/4" e. - 5/8"i.
In stock
Thread adapter compressed air G 5/8" female thread - nitrogen W24 male thread
Adapter 5/8" i. 200bar - 3/8" AG
In stock
Adapter M24x2a.-M26x2 a.. (Draeger regulator - nitrox valve)
In stock
Adapter for oxygen 3/4" e. - 1/4" i.
In stock
Adapter M24x2 i. - 3/4" e. (Draeger valve - oxygen)
In stock
Thread adapter oxygen G 3/4\" Female thread - inert gas W21.8 male thread
In stock
Adapter M26x2 i.-3/4"i. (oxygen - nitrox)
In stock
Thread adapter oxygen G 3/4" female thread - oxygen G 3/4" female thread
In stock
Adapter M24x2 i.-3/4"i.
In stock
Hochdruckanschluß für Edelgase, W21.8 Überwurfmutter mit Anschlußstutzen G 1/4"
In stock
high-pressure accession for oxygen, 3/4" cap nut with a branch of 1/4"
In stock
High-pressure connection for nitrogen W24 union nut with connection piece G 1/4\"
In stock
Manometer für Druckluft Kl.1.6, 63mm Durchmesser, Anzeige 0...400 bar. Manometer mit R1/4\" Anschluss unten Gehäuse: Stahlblech, Messsystem, Anschluss und Zeigerwerk: Messing, Sichtscheibe: glasklarer Kunststoff
Top rated
Adapter 300 Bar Druckluft aussen. nach 300 Bar Sauerstoff aussen
In stock
Multiadapter 300 Bar W30x2 - Druckluft 200 bar G 5/8" Innengewinde
In stock
Multiadapter 300 bar oxygen/helium/compressed air to oxygen 200 bar G3/4" male thread
In stock
Filter material for refilling breathing air filters in compressors
1 x 5 liters activated carbon + 2 x 5 liters molecular sieve
In stock
Bridge revision kit for San-O-Sub and OMS valve bridges. Suitable for the preventive repair of valve sets of double devices. Valves and valve sets should be subjected to regular maintenance, just like regulators. The best opportunity is the inspection of the scuba tank for the periodic inspection (TÜV inspection). The required spare parts kit is available here.
In stock
Pipe bridge middle section 232 and 300 bar, for connecting diving cylinder valves with connection thread M16x1 right and left-hand thread, e.g. Polaris and Scubapro bridge valves. This pipe bridge is particularly suitable for connecting 4 and 7 liter scuba tanks.
In stock
Bottle labels, labeling of oxygen diving bottles.
Items 1 - 50 of 66