Germany
connection for filling hose 5/8" 300bar extended thread - 1/4" estended thread
Filling adapter for carbonic acid for filling CO2 and argon cylinders with valves according to DIN 477-6 which have a flow-off protection/residual pressure valve. The thread W21.8 is used for all gas cylinder valves that are used for shielding gas welding, argon, helium, carbonic acid and argon mixed gases.
Adapter for normal air 300 bar (extended thread) - normal air 200bar (intended thread)
filling and removing adapter for oxygen / air; to fill nitrox tanks with oxygen valve.
Assembly tool for G5/8" dip bottle valves for torque wrench with square socket 14x18mm
Multiadapter 300 Bar Sauerstoff/Helium/Druckluft auf Druckluft 300 Bar Innengewinde
Shut-off valve for 300 bar with G1/4" female thread on both sides
Air Dry zur Atemlufttrocknung 1 Liter Eimer
Air Stop suitable for regulator cyclone. A small component which is installed between the second stage and the regulator hose. By moving the adjusting ring, the air supply to the second stage can be interrupted or released with a single movement.
Connection T-piece for interconnecting storage cylinders G5/8" - 2x G1/4"
Connection shaft with pressure screw for filling fittings G5/8" 300bar male thread - G1/4" male thread. Filling connection for storage batteries, breathing air compressors or filling ramps as a spare part or for completion. Suitable for permanent connections with wrench size 32mm for tightening with fork wrench / open-end wrench.
Brass stopper for compressed air G5 / 8 "with O-ring pressure-resistant 200bar, hexagon with key width 30mm
Blanking plug G5/8" Pressure-resistant 200bar with 60° sealing cone to seal Material galvanized steel Hexagon with wrench width 30mm