DIN EN 144-2 / DIN EN ISO 12209
DIN EN 144-2 / DIN EN ISO 12209
Items 1 - 7 of 7
In stock
Monovalve compressed air 200 bar 25E large conical industrial valve for compressed air cylinders. The connection thread for the end take-off unit is G5/8" thread according to DIN EN-144. The seal to the gas cylinder is made with Teflon tape.
In stock
Monovalve compressed air 300 bar 25E large conical industrial valve for compressed air cylinders. The connection thread for the tapping unit is G5/8" thread according to DIN EN-144. The seal to the gas cylinder is made with Teflon tape.
In stock
Tauchflaschenventil horizontal 300bar Druckluftanschluss, M18x1,5
In stock
Monovalve compressed air left, 230 bar, expandable EN144
In stock
Monovalve Compressed Air 230 Bar Standard diving tank valve with bottle neck thread M18x1.5mm. Smaller gas cylinders and diving tanks have the smaller bottle neck thread. In the past, these pressure vessels were equipped with the small conical thread, while newer ones often have the M18x1.5mm bottle neck thread. Sealing is achieved with an O-ring.
In stock
SH-Monovalve G5/8" compressed air 230 bar bottle neck thread M18x1.5mm. The "Standard Horizontal Valve" is arranged horizontally, with the valve handle and regulator connection opposite each other and at a 90° angle to the axis of the diving tank.
In stock
Z - Mono diving cylinder valve for compressed air 230 bar not extendable Handle left. Diving cylinder valve according to DIN EN-144 for diving cylinders with M18x1.5 cylinder neck thread.
Items 1 - 7 of 7