DIN EN 144-2 / DIN EN ISO 12209

Aluminum diving cylinder 11.1 liters (80 cu ft) 207 bar complete with valve. This aluminum diving cylinder is the most commonly used cylinder for stage cylinders in technical diving and sidemount diving. Due to its dimensions, this diving cylinder is almost neutrally buoyant in water.

Aluminum diving cylinder 5.7 liters (40cft), 207 bar complete, equipped with a valve of your choice. The 5.7-liter aluminum diving cylinder is often used in technical diving as a stage bottle for oxygen or nitrox. The breathing gas supply is sufficient for approximately 30 minutes of safety stop or decompression stop.

Aluminum diving cylinder 5.7 liters = 40cuf, 207 bar cylinder body. Diving cylinders without valve for completion with breathing apparatus and diving equipment. This diving cylinder can be equipped with a valve according to EN-144 or DIN EN ISO 12209 with a neck thread M25x2.

Brass stopper for compressed air G5 / 8 "with O-ring pressure-resistant 200bar, hexagon with key width 30mm

Compressed air valve bridge for double immersion devices with cylinder diameters 140mm and 171mm. Distance between cylinder centers 185mm. The connection between the cylinders can be shut off. This valve combination is manufactured in accordance with DIN EN-144. The cylinder neck thread is M25x2mm O-ring sealed. Double scuba diving equipment considerably increases the level of safety, as these scuba cylinders offer the scuba diver two independent diving devices with two autonomous regulators.

Compressed air valve manifold for double devices with cylinder diameter 171mm Distance cylinder center 185mm