Germany
Anschlußkreuzstück für Manometer + Entlüftungsventil + Anschlußwelle
Union nut W30x2 suitable for all 300bar industrial valves with left-hand thread welding gases, test gases and fuel gases.
Bourdon tube pressure gauge oxygen class 1.6, diameter 63mm, indicating range 0...400 bar. Pressure gauge G1/4" connection at the bottom, housing made of sheet steel, insertion disc made of polycarbonate, blow-out back plate, measuring system CU alloys, front disc crystal clear plastic.
Shut-off valve for 300 bar with G1/4" female thread on both sides
Air Dry zur Atemlufttrocknung 1 Liter Eimer
Air Stop suitable for regulator cyclone. A small component which is installed between the second stage and the regulator hose. By moving the adjusting ring, the air supply to the second stage can be interrupted or released with a single movement.
Connection T-piece for interconnecting storage cylinders G5/8" - 2x G1/4"
Connection shaft with pressure screw for filling fittings G5/8" 300bar male thread - G1/4" male thread. Filling connection for storage batteries, breathing air compressors or filling ramps as a spare part or for completion. Suitable for permanent connections with wrench size 32mm for tightening with fork wrench / open-end wrench.
connection for filling hose 5/8" 300bar extended thread - 1/4" estended thread
Brass stopper for compressed air G5 / 8 "with O-ring pressure-resistant 200bar, hexagon with key width 30mm
Blanking plug G5/8" Pressure-resistant 200bar with 60° sealing cone to seal Material galvanized steel Hexagon with wrench width 30mm
Monovalve compressed air left, 230 bar, expandable EN144
Ventil kleinkonisch (17E) Druckluft
Monoventil Druckluft 232 Bar Flaschenhalsgeinde kleinkonisch, erweiterbar
rechtes Brückenventil mit M16x1 Gewinde für Zweitabgang.
Monoventil Druckluft erweiterbar 230 Bar, linkes Brückenventil für Flaschenhalsgewinde M18x1,5
Monoventil Druckluft erweiterbar 230 Bar, rechtes Brückenventil für Flaschenhalsgewinde M18x1,5
Monovalve compressed air left, 230 bar, expandable EN144
Mono valve for normal air 230 bar, extandable EN144
Doppel - Standfuss 171 mm Flaschendurchmesser. Tauchflaschen sind Druckbehälter und müssen deshalb mit einen Standfuß versehen werden. Der im Tauchsport übliche Flaschenstandfuß ist aus schwarzen schlagzähen Gummiähnlichen Kunstoff. In dieser Ausführung für Daoppeltauchgeräte mit 185mm Flaschenmitte - Flaschenmitte.
Wer kennt das nicht, zu Hause taucht man mit zwei getrennten ersten Stufen und für den Urlaub baut man alles um, weil ja die Flasche da nur einen Abgang hat. Die Lösung ein Vorsatzventil, wie im Bild. Und das Gute, jeder Automat ist einzeln auch unter Wasser absperrbar.