Germany
Brass stopper for compressed air G5 / 8 "with O-ring pressure-resistant 200bar, hexagon with key width 30mm
Handrad für G 5/8" Druckluftanschluß 300 bar, lange Ausführung
Anschlußkreuzstück für Manometer + Entlüftungsventil + Anschlußwelle
Filling adapter for nitrogen according to DIN477-10 for filling nitrogen cylinders with valves that have a flow-off protection / residual pressure valve. Residual pressure valves work similar to check valves and must be actuated to refill the gas cylinder.
Adapter for oxygen to normal air, extanded threads
filling and removing adapter for oxygen / air; to fill nitrox tanks with oxygen valve.
Adapter Air (5/8") -- inert gas (W21.8) inside / inside
Thread adapter compressed air G 5/8 "internal thread - nitrogen W24.8 x 1/14" internal thread. This adapter is designed to connect pressure reducers to compressed air nitrogen bottles. Or to fill nitrogen bottles on high pressure compressors with 200bar compressed air
Multi-adapter 300 Bar W30x2 internal thread - W30x2 external thread for residual pressure valve with grub screw for operating the residual pressure Valve.
Monovalve Compressed Air 230 Bar Standard diving tank valve with bottle neck thread M18x1.5mm. Smaller gas cylinders and diving tanks have the smaller bottle neck thread. In the past, these pressure vessels were equipped with the small conical thread, while newer ones often have the M18x1.5mm bottle neck thread. Sealing is achieved with an O-ring.
Monovalve for mixed gases/Nitrox with outlet connection M26x2, pressure range 230 bar with bottle neck thread M18x1.5mm. The valve with its handle is a standard shut-off device for diving tanks and breathing apparatus.
SH-Monovalve G5/8" compressed air 230 bar bottle neck thread M18x1.5mm. The "Standard Horizontal Valve" is arranged horizontally, with the valve handle and regulator connection opposite each other and at a 90° angle to the axis of the diving tank.
SH-monodiving tank valve Nitrox / mixed gases 230 bar M26x2 connection thread M18x1.5 bottle neck thread. Diving tank valve for installation in diving tanks with bottle neck thread M18x1.5mm.
Union nut W30x2 suitable for all 300bar industrial valves with left-hand thread welding gases, test gases and fuel gases.