High Tech Diving
High Tech Diving
Air Stop suitable for regulator cyclone. A small component which is installed between the second stage and the regulator hose. By moving the adjusting ring, the air supply to the second stage can be interrupted or released with a single movement.
Connection T-piece for interconnecting storage cylinders G5/8" - 2x G1/4"
Connection shaft with pressure screw for filling fittings G5/8" 300bar male thread - G1/4" male thread. Filling connection for storage batteries, breathing air compressors or filling ramps as a spare part or for completion. Suitable for permanent connections with wrench size 32mm for tightening with fork wrench / open-end wrench.
Brass stopper for compressed air G5 / 8 "with O-ring pressure-resistant 200bar, hexagon with key width 30mm
Blanking plug for R 5/8\" Valves with O-ring and Allen key. This dummy screw with G5/8\" external thread is suitable for the diving cylinder valves to which the rotatable second outlet 200 bar would fit. However, it can also be used to close an unused second outlet on the scuba tank valve. The blind plug is made of brass and is chrome-plated.