HighTechDiving

Air Stop suitable for regulator cyclone. A small component which is installed between the second stage and the regulator hose. By moving the adjusting ring, the air supply to the second stage can be interrupted or released with a single movement.

Aluminum diving cylinder 11.1 liters (80 cu ft) 207 bar complete with valve. This aluminum diving cylinder is the most commonly used cylinder for stage cylinders in technical diving and sidemount diving. Due to its dimensions, this diving cylinder is almost neutrally buoyant in water.

Aluminum diving cylinder 5.7 liters (40cft), 207 bar complete, equipped with a valve of your choice. The 5.7-liter aluminum diving cylinder is often used in technical diving as a stage bottle for oxygen or nitrox. The breathing gas supply is sufficient for approximately 30 minutes of safety stop or decompression stop.

Connection T-piece for interconnecting storage cylinders G5/8" - 2x G1/4"

Connection shaft with pressure screw for filling fittings G5/8" 300bar male thread - G1/4" male thread. Filling connection for storage batteries, breathing air compressors or filling ramps as a spare part or for completion. Suitable for permanent connections with wrench size 32mm for tightening with fork wrench / open-end wrench.

Brass stopper for compressed air G5 / 8 "with O-ring pressure-resistant 200bar, hexagon with key width 30mm

Blanking plug for R 5/8\" Valves with O-ring and Allen key. This dummy screw with G5/8\" external thread is suitable for the diving cylinder valves to which the rotatable second outlet 200 bar would fit. However, it can also be used to close an unused second outlet on the scuba tank valve. The blind plug is made of brass and is chrome-plated.